Roger EVR Manual

Leqtique EVR - This is the manual page for Roger EVR.

This pedal shares many of its sound and features with the Leqtique - Roger, designed in 2017.

For an explanation of each control, please refer to the original manual below.

However, the EVR version has an additional control inside called "Dynamics".

When the red slide switch is tilted to the right, the blue knob-type "Dynamics" control is turned off, and the unit will be powered by a battery or 9V DC power supply regardless of its setting.

Also, moving the red slide switch to the left will turn on the "Dynamics" control. When this is turned on, the current consumption is large, so we recommend using a DC power supply if possible.

Turning "Dynamics" counterclockwise will result in a narrower dynamic range and stronger compression, as the internal drive voltage will be around 8V, lower than the normal drive voltage of 9V.

Turning "Dynamics" clockwise will set the drive voltage to around 16V, widening the dynamic range and headroom, and reducing compression. At the same time, the gain will decrease and the volume will increase, so we hope you will adjust each of these with the controls.

Current Consumption:

"Dynamics" OFF: 8(mA)

"Dynamics" ON: 15.0-17.3 (mA) (DC power supply recommended as batteries consume a lot of power)