11/11 EVR Manual
Leqtique EVR - This is the manual page for 11/11.
This effector shares many of its sounds and functions with the Leqtique - 11/11 designed in 2018. Please refer to the original instruction manual below for an explanation of the basic controls.
However, there have been additions and changes to the internal controls, so please refer to the additional notes marked * below for details.
*The EVR version has an additional control inside. As shown in the photo below, there is a small switch marked "1" and "ON", which mainly adjusts the gain and low end of each stage of the 11/11 EVR, which connects distortion elements in series in multiple stages like an amplifier circuit.
When shipped, they are set to the upper position marked "ON", which gives the highest gain and low end (both of which are slightly stronger than the original Leqtique - 11/11).
Turning one or both of these knobs down to "1" will gradually lighten the gain and low end. The Bottom control on the front mainly controls the same low end, but it has a different effect because it shapes the tone after the distortion section, and this internal control produces a crisper and cleaner tone. It is more effective when riffing like Djent or when excessive low end is a nuisance in your performance environment, so we hope you will try it out each time.
*The effect of the internal Mid Cut control on the 11/11 EVR #1-#88 is different from the original Leqtique - 11/11, and it is turned counterclockwise to set Mid Cut. The factory setting is 50% (12 o'clock), and the maximum and minimum control range, control band Freq and Q are the same as the original Leqtique 11/11. Please note that the only thing to note is that the control direction is the opposite to the original. Note that from some of the products manufactured in April 2025 (#89-), Please note that the Mid Cut direction is clockwise, just like the original Leqtique 11/11.